 |
JQI Arduino Libraries
Arduino for the modern scientist.
|
|
JQI Arduino Libraries
Arduino for the modern scientist.
|
These are a few arduino libraries we are using at the JQI. Hopefully they are useful to others, too! The idea is to make it easy to interface with various instruments in the lab (frequency sythesizers, DACs/ADCs, etc).
Some of these libraries are in flux, so your mileage may vary! If you see a bug or would like to contribute, open an issue or send us a pull request.
For library-specific documentation information, check out the Doxygen Documentation. There is also lots of good info in the README files for each library.
Send questions to [npisenti] at [umd].
This one is a class to handle SPI/serial communication with an AD9954 DDS chip. Still in development, but currently supports single-frequency setpoints and bi-directional linear ramps, controlled by pin PS0.
This class handles a voltage input from a frequency lock signal, and updates the corresponding DDS frequency to track the lock.
Class to handle SPI/serial communication with the ADF4350 PLL chips (slash eval boards...)
Class to interface with an external EEPROM chip (specifically, 24LC16B). The Arduino Due should be able to utilize part of its onboard Flash memory through in-application programming on the SAM3X, but I wasn't able to get that to work. Ultimately, it seemed easier to just use an external EEPROM chip.
Wrapper class for writing to SparkFun's Serial LCD display: https://www.sparkfun.com/products/9066. NOTE: you want the 3.3V version for the Arduino Due!
Library for working with Analog devices' AD536x family DACs. Should work with { AD5360, AD5361 } (16 channels, 16/14 bit DAC) and { AD5362, AD5363 } (8 channels, 14/16 bit DAC).
1.8.8
